Wireless Networking • Re: Netbox 5 AX, L11UG-5HaxD wont send data
I need upgrade from netmetal AC to Netbox AX , maybe news about new software resolve problem distance???????Statistics: Posted by wg105 — Fri Apr 26, 2024 9:13 pm
View ArticleClik here to view.
General • Help troubleshooting SNMP agent intermittently not working v7.14.2
We could use some help figuring out where to go from here to troubleshoot this issue.So a week or two ago we just got done ensuring all of our several dozen mikrotik site routers got upgraded to...
View ArticleBeginner Basics • Re: Eth1 vlan 911 tagging for ISP connection
Cloning MAC address of ISP's router did not work, still seems to be doing the same thing where it does not pick up IP from DHCP, still waiting for a response from ISP...Statistics: Posted by Airiasas...
View ArticleGeneral • PowerBox Pro as a POE Switch
The wire between my 2 out door APs was damaged by a fire. I also want to be able to add a PtP link.The POE injector I was using is a 60 watt 56V injector.Took the POE injector and plugged it into the...
View ArticleGeneral • Api Mikotik
Hello, I need help from the community. I have a Mikrotik 750, it is factory reset and does not have any firewall programmed. It has API port 8728 enabled. What I need is to communicate with the API...
View ArticleAnnouncements • Re: SwOS Lite version 2.18 released!
Are the missing pings new with 2.18, and fixed by downgrade to 2.17? (warning: can't downgrade lower than 2.17 without losing config because of changed config file format - sadly still not hashing the...
View ArticleBeginner Basics • Route specific sites and one IP Address through PIA VPN
I've been trying to setup the following for days now with the help of several posts on this forum, but I just can't get things working and I am coming to a point that I am lost. I'm trying to achieve...
View ArticleGeneral • Help with Scheduled Access Restrictions on MikroTik RB750Gr3
Hi everyone,I'm relatively new to MikroTik and am facing a challenge setting up access restrictions based on specific times and user groups on my RB750Gr3.Network Setup:The network setup includes a...
View ArticleBeginner Basics • carry vlans PTP
Hello all, today i read much but cannot find solution by myself. I have to connect two building with PTP. How can i carry all vlans building 1 to building 2. I also neeed to connect both mikrotik...
View ArticleGeneral • Re: Unable to find wifi radio data after upgrade to 7.14.3
Thanks for your reply.Problem fixed:System > packages > wifi-qcom - disableSystem > packages > wifi-qcom-ac - enable. (I am running AC-device)Reboot at the end as well.It is kind of...
View ArticleBeginner Basics • Re: Vlan for Voice
After a lot of headscratching, I think I've come up with a solution which won't lock you out of your router. If it happens anyway, please excuse me in advance.1. Add SFP WAN and ether8 in the bridge...
View ArticleGeneral • Trouble with multicast over WiFi on RB4011iGS
Hello MikroTik Community,I'm facing a problem with multicasting over Wi-Fi. When I connect the laptop with a wire, everything works fine.Setup:Devices: Raspberry Pi (connected on Ethernet port 4),...
View ArticleScripting • Re: Automating configuration of APs
Bro i want to add username and password for more than one AP in same timeStatistics: Posted by barham123 — Sat Apr 27, 2024 12:25 am
View ArticleWireless Networking • WPA2 EAP Station Mode
I have been trying to set up an HAP AX2 in station mode running RouterOS 7 to connect to a WPA2-Enterprise wireless network using PEAP MSCHAP V2 and I'm having difficulty making a connection. I have...
View ArticleGeneral • Re: No DHCP on Bridge VLAN interface.
Welp, I thought that was working, but it very clearly is not. Only vlan 10 works now and none of the other vlans do. Neither on wired, or as I'm digging in on wireless can I pass traffic. The familiar...
View ArticleForwarding Protocols • Re: Question with BGP
In prolexic we got a 2 byte AS number and established a bgp peer with them if there's an attack they are going to notify you and ask for confirmation since this is a manage service they are going to...
View ArticleWireless Networking • hAP ax² 3 Vlans at internal Atenna
Hi, I try to add 5 Vlans to my hAP ax² and want to use 3 of them with the internal antenna. I am a bit confused using the templates you offer at https://help.mikrotik.com/docs/display/ ......
View ArticleThe Dude • Slow Loading
Hey Everyone, I've got something weird going on. For the last couple of weeks the dude has had a hard time loading. Yes I've checked the license, and I have a P1 license, so that's not the problem....
View ArticleThe User Manager • although the shared user is 4 but just one can join hotspot
hiI have a hotspot on my router that is working well with local users and also working good with usermanager.I`ve got two problems one there are always too many of the same user and same mac address...
View ArticleRouterBOARD hardware • Re: Adding a cooling fan to CRS326
Anyone else find that the enclosure for this case acts like a sound amplifier?I no longer have one of these switches in my attic.Instead they are in living spaces of my home, where the noise profile...
View ArticleGeneral • packet rates (p/s) in raw table
Guys, I'm having DDOS attacks on my network and when it occurs, the packet rates (p/s) are above 7000 for the IPs that are being attacked. I have the contrack table disabled.Would anyone know how to...
View ArticleGeneral • Re: QOS help
Thanks. You're right about reducing the max-limit to achieve best latency results.Running this right now and seems to perform pretty well all around. Code: /queue typeadd cake-diffserv=diffserv4...
View ArticleGeneral • Re: Multiple default routes in main route table
That is not an example to use in any config, its generic.For example on a config the first three main routes should be separated by distance etc..If you have a real config with real questions, then...
View ArticleWireless Networking • Re: hAP ax² 3 Vlans at internal Atenna
Is your ax2 only AP in your network ? If yes then why are you using CAPsMAN ?Local radio interfaces are managed locally, not via capsman, so radios on your ax2 are not configured by CAPsMAN, assuming...
View ArticleGeneral • Re: Wireguard Speed and CPU
Hello, after a few days of testing, the solution has been to downgrade to version ROS7.13. After downgrading, everything has gone smoothly and I haven't observed any of the CHR vCPUs reaching 100%...
View ArticleGeneral • Long Range WIFI for remoate Boat?
We are currently developing an autonomous boat that can be controlled via Wi-Fi. We are searching for a Wi-Fi module that can cover a range between 1 km to 5 km. The lake area has no obstacles that...
View ArticleBeginner Basics • Re: VPN setup question
Hi,Some options.Option 1Push a route to the client (or set it up on OVPN client) of 192.168.10.0/24 via the existing OVPN connection.Then let the (presumably existing) configuration on the Mikrotik...
View ArticleGeneral • Re: Api Mikotik
Rest API is on port 80 / 443 the old api which is completely different, is on port 8728Statistics: Posted by kormenator — Sat Apr 27, 2024 10:01 am
View ArticleRouterBOARD hardware • Re: hAP ax Lite USB power
Can you connect a USB dongle with a special cable like you do with MAPs?Statistics: Posted by abbio90 — Sat Apr 27, 2024 10:10 am
View ArticleGeneral • Multiple RoadWarrior L2TP/IPsec clients behind NAT in ROS7
Hi there!As Android dropped support for L2TP/IPsec in new versions, it looks like L2TP/IPsec should be dead, but we are using it on Windows clients because of good support by OS.As per Sindy in his...
View ArticleGeneral • Re: Mikrotik CRS326 RM - WebUI & Winbox disconections
Hi Mkx,Sorry for my late answer, I have been out of town a while.So, coming back to my set-up:- fiber box from SIP (Free, in France): mode bridge- router: Asus AX88U with Asus-Merlin (with specific...
View ArticleBeginner Basics • Re: carry vlans PTP
Wireless drivers by default don't touch 802.1Q headers ... so if they receive frame with such header on one side (either radio or CPU side), they will pass it to the other side. So what you have to do...
View ArticleBeginner Basics • Cisco VLAN to Mikrotik
Hi!I should replace one old cisco switch. I bought a CRS326-24G-2S+RM.I can make just half hour down on the site, so the configuration should be good.I have exported the cisco config:Code: no file...
View ArticleBeginner Basics • Re: Cisco VLAN to Mikrotik
Is this enough for make it work? All wrong. Have a (very good) look at this tutorial: viewtopic.php?t=143620Your "ROSish" cludge doesn't seem to follow Cisco config (not closely at least), so I'm not...
View ArticleThe Dude • Dude
Hi there i wan a way to open AP from dude directly to winboxStatistics: Posted by barham123 — Sat Apr 27, 2024 1:35 pm
View ArticleBeginner Basics • Constant traffic between Mikrotik and computer
Hi all, I have a Mikrotik Rb750Gr3 and it is running RouterOS v6.49.13 (stable). I connect my laptop to the router using a LAN cable and the Mikrotik connects to the internet through a USB hotspot...
View ArticleBeginner Basics • Re: Constant traffic between Mikrotik and computer
Just to add, a few minutes after submitting the post it seems to have stopped (look around time 500 in the attached) - even though WinBox is still open and I didn't change any settingsI have the PCAP...
View ArticleGeneral • L2TP VPN strange behaviour
Hi all,So I've got a strange one with an RB1100 router which I've added in a L2TP server interface to allow me remote access to tweak configuration. Network is still being deployed, so currently only...
View ArticleContainers • Re: IPv6 default route not added on a container instance
Hi,Your IPv6 netmask might be the root of the problem. What if you replace /128 with /64 for this veth? Naturally, your router must also have fd08:192:168:8::1/64 assigned on the bridge this veth is a...
View ArticleClik here to view.
General • Re: Long Range WIFI for remoate Boat?
I believe that in that kind of use the key parts of the setup are the antennas.You need an omnidirectional one on the boat and a sector (like a 60°/90°/120°) on the ground, (but someone will need to...
View ArticleBeginner Basics • Sanity check for my VLAN setup and more
Hi,I reset my HaP AC2 and started to set it up from scratch, implementing my LAN with the VLAN feature. Before I go ahead and set up other fancy stuff on it, like load balancing and PBR, I'd like you...
View ArticleGeneral • Re: L2TP VPN strange behaviour
1) Remove these two rules from the forward chain-add action=fasttrack-connection chain=forward comment="Fasttrack DNS" \ dst-port=53 protocol=tcpadd action=fasttrack-connection chain=forward...
View ArticleBeginner Basics • New to Mikrotik, help setting up
So I need help setting up a Mikrotik CSR309-1G-8S+IN, i went thru the guides and setup dhcp, dns, both wan ip and lan ip but I'm not getting internet connection. I didnt do firewall or wlan, not sure...
View ArticleAnnouncements • Re: v6.49.13 [long-term] is released!
Question about release notes: Aren't the changes listed in the first post in this thread very incomplete? Shouldn't the long-term release notes for 6.49.13 include all the changes between it and the...
View ArticleBeginner Basics • Forwarding ports
Hi!I have server with simple web page (ports 80 & 443). On Tomato I had it was working very nice. Now, on MT I'm failing with configuration. I found this one: viewtopic.php?t=150467, so I tried to...
View ArticleBeginner Basics • Mopidy issue
Hi!I have mopidy on one VLAN and my PC is on another one. Mopidy uses port 6680. I can connect via SSH to the server, but not over 6680. Looking for solution for different issue I found something. I...
View ArticleSwOS • Re: SwOS api
I have partially implemented some stuff to manage my css326 with saltstack. Maybe, this can help to do better...
View ArticleBeginner Basics • Re: Forwarding ports
probably running into hairpin nat.Are local router users trying to reach the server via its LANIP address or by some DYNDNS URL ( aka the WANIP ).Should not affect external users ( did you test like...
View ArticleBeginner Basics • Re: Sanity check for my VLAN setup and more
The only thing required on the bridge is to give it a name other, than bridge, if so inclined, and at some point change vlan-filtering to yes ( aka get rid of frame type setting and leave that to...
View ArticleGeneral • Mikrotik rb4011 wireguard issue
# 2024-04-27 15:58:00 by RouterOS 7.11.3## model = RB4011iGS+/interface bridgeadd dhcp-snooping=yes name=bridge1/interface ethernetset [ find default-name=ether1 ] comment=Main-WANset [ find...
View Article
